Osmo Concrete Interior Oil Clear Satin 610 - Choose 2.5Ltr or 0.75Ltr

Description

Osmo Concrete Exterior Oil is an interior finish suitable for the clear impregnation of nearly all types of concrete (exposed concrete), artificial stone, screed as well as microporous natural stone with a polished, sanded or break surface as well as for unglazed tiles. Especially suited as wall panelling and flooring in the kitchen and bath as well as for tabletops, windows sills and kitchen worktops.

Approx. coverage: 50m²/L with one coat
No. of coats: 2 coats
Drying time: 8-10 hrs.
Sizes: 0.750L, 2.5L

Made from natural oils and waxes
Microporous, breathable finish which does not crack, peel, flake or blister
Highly water repellent
Protects against dirt and wear
*Seals porous tile material ready for grouting

APPLICATION
Ensure that the surface to be treated is completely dry and absorbent. If necessary, all existing sealants should be completely removed. Working in small, controllable areas at a time, apply the product very thinly and spread well using either an Osmo Flat Brush, Floor Brush, Oil Finish Applicator Fleece (Hand Pad Holder) or Microfibre Roller. Remove any excess product (pooling or streaks) with a pad or a lint-free cloth. For very large areas to be treated, remove excess oil with a rubber scraper and polish with a buffing machine(white pad).Important: the liquid oil must be absorbed into the surface. Following application, there must not be any oil left on the surface. Allow to dry for 8-10 hours. Ventilate well while drying. Apply the second coat also very thinly. Again, remove any excess. When renovating already oiled surfaces, normally one coat on a cleaned surface is sufficient.

RECOMMENDED
All types of interior concrete (exposed concrete)
Absorbent artificial Stone
Screed
Microporous, Natural Stone with a polished, sanded or break surface
Unglazed tiles