Creative Wood Floors
01256 841353 
Hello guest
Your basket is empty
wood panel flooring

Treatex Exterior Cedar Oil 2.5Ltr + Free Tin Opener

£67.00

Treatex Cedar Oil 2.5Ltr

Quantity:

Description

Treatex Cedar Oil penetrates deeply into timber surfaces and, in a similar way to bark, attaches to the wood capillaries providing protection against extreme climate conditions. This product is designed to be used outdoors on timbers like cedar and larch.

Suitable for: internal and external use
Recommended timbers: Cedar and Larch
Applications: cladding, windows and doors
2.5L will cover approximately 35m² in one coat depending on timber and method of application.

Preparation

Treatex Cedar Oil works best on unfinished timber. Previous finishes which stop Treatex Cedar Oil penetrating into the timber (e.g. paint and other ‘closed’ finishes) must be fully removed prior to application. Previous porous finishes should be lightly sanded before overcoating. When overcoating a previously finished surface, a trial application is essential. Flaking or peeling finishes must be fully removed prior to application. Ensure the timber is dry and free from possible contaminates e.g. algae, grease, dirt, dust etc. Timbers susceptible to decay, mould and fungi should be treated first with a suitable preservative. We advise that when using Treatex Cedar Oil, sufficient product is purchased to complete the whole project and when more than one tin is required it is advisable to mix them together before use. Timber must have a moisture content below 18%. Temperature must be between 8º𝖼 and 25º𝖼 during application and drying. We strongly recommend a trial application prior to starting the project.

Application

Stir tins thoroughly, before and during use. Use a brush or roller to evenly apply Treatex Cedar Oil in the same direction as the wood grain. Pay particular attention to end grain, on end grain apply liberally. If possible, treat all sides of the timber for the first coat. After approximately 12 hours the first coat can be overcoated. Apply with a brush or roller a second coat of Treatex Cedar Oil. After the second coat leave for approximately 12 hours to dry. Treatex Cedar Oil is not a surface building product

Customer reviews

This product has not yet been reviewed

Also in Treatex Exterior Products

Back to top 
Our site uses cookies. For more information, see our cookie policy. Accept cookies and close
Reject cookies Manage settings