Treatex Hardwax Oil Ultra Natural is our next generation Hardwax Oil, designed specifically to help preserve the natural beauty and tone of light coloured timbers. Hardwax Oil Ultra Natural follows the success of our current formulas benefits of being user friendly, easy to apply and quick drying, whilst offering improved ease of application and durability. The end result is a hard wearing, attractive finish in any situation including, floors, doors and kitchen worktops that is easy to maintain with our maintenance products and is spot repairable if the surface is damaged. Treatex Hardwax Oil Ultra Natural is also based on the Treatex formulation of sustainable raw materials such as Bees wax, Carnauba wax, Candilla wax, Linseed oil, Sunflower oil, Jojoba oil. It contains no biocides or preservatives.
Suitable for: Internal use
Recommended timbers: Lighter coloured timbers e.g. Oak, Pine, Ash, Beech, Birch, Maple, Sycamore etc.
Applications: Floors, doors, stairs, worktops, woodturning etc.
Natural Hardwax Oil contains a small amount of white pigment which allows it to be used in two different ways:
- Base coat:
If you prefer to protect light timbers whilst changing the unfinished colour as little as possible then Treatex Hardwax Oil Ultra Natural can be applied as a base coat underneath two coats of Treatex Clear Hardwax Oil Ultra to neutralise the warming effect.
- Top coat:
For a purer white, seal Spruce Colour Tone with two coats of Hardwax Oil Ultra Natural. When Treatex Clear Hardwax Oil is applied on top of our Spruce Colour Tone it can have a slight yellowing effect on the colour.
Hardwax Oil Natural is not a complete finish in its own right and should either be treated with 2 coats of Hardwax Oil Ultra Clear or should applied as 2 coats over Spruce Colour tone.
1L will cover approximately 25m² in one coat depending on the timber and method of application.
2.5L will cover approximately 50m² in one coat depending on the timber and method of application.