Description
Features and Highlights
An elastic, one-component, silane-based floor adhesive
Perfect for installing parquet flooring or narrow solid boards
High initial bonding strength, reduces potential for hollow spots
Can be used on both wood and concrete substrates
Retains the trowel pattern due to its firm texture
Ready for furniture and foot traffic in 24 hours
Can be used with underfloor heating systems
Very low V.O.C
Coverage Guide
Use a fine trowel for small pieces of wood and/or smooth substrates, and a coarse trowel for large pieces of wood and/or less smooth and rough surfaces (F = fine, G = coarse) Bona Adhesive Trowel
Mosaic parquet or any other similar solid parquet: approximately 900 g/m², Bona Trowel 850 G or 850 F
2 layered pre-finished parquet and 22 mm block parquet: approximately 1100 g/m², Bona Trowel 1000 F or Bona 1000 G
3-layered pre-finished parquet, boards and solid wood planks (max. 22 x 120 mm): approximately 1350 g/m², Bona Trowel 1250 F or 1250 G
The adhesive consumption during the application with the Bona OptiSpread system depends mainly on the walking speed as well as the adjusted air pressure (OptiSpread 100, OptiSpread 2.0). Please refer to respective machine manual.
For full application and coverage details, please refer to the 'Technical Information' Datasheet link above.
It is possible to apply load and stress to the floor after approximately 24 to 48 hours. Any sanding and surface coating to be applied, may be carried out after 1 to 4 days depending on the type of parquet, absorbency of the substrate and room climate.