Description
Bona Domo Varnish is a ready to use water based polyurethane lacquer. Providing a good build and film clarity means it can be used from the start of a project through to the finish and is primarily designed for residential floors. By using a quick drying formulation and with being easy to abrade and apply, Bona Domo is a long lasting coating that offers good durability.
Preparation
Ensure the floor is acclimatised to its end use environment. If the project area has been previously oiled or varnished, then remove this layer through sanding down to the bare wood.
Remove any contaminants such as oil or grease with a suitable detergent
Sand the surface to a flat finish, with the final sanding performed with using 120 grit sandpaper
Clean any dust or grit from the floor by either sweeping or with the use of a vacuum cleaner
For filling small gaps between floor boards or skirting boards, use Bona Gap Master Filler
If being applied to an untreated wooden floor there are two options for the final preparation:
Option One:
Apply a suitable primer for the project, with all Bona primers being fully compatible
Light sanding with a 150 grit sandpaper
Option Two:
Apply Bono Domo
Light sanding with a 150 grit sandpaper
Please note: For floors where there is a risk of sidebonding, such as endgrain floors, softwood plank floors and hardwood floors with underfloor heating, it is always recommended to use a primer.
No. of coats 3
Drying time 2 hrs
£10.80
£72.00
£12.96
£19.14
From £35.00
£27.60
£27.60
£110.00
£42.85
£152.00
£152.00
£42.00
£77.00
£93.00
