Creative Wood Floors
01256 841353 
Hello guest
Your basket is empty
wood panel flooring

Osmo UV Protection Oil Cedar 428 2.5Ltr + Free Tin Opener


Osmo UV Protection Oil Cedar 428 2.5Ltr + Free Tin Opener



Tinted satin-matt finish for exterior use.
For exterior vertical surfaces such as cladding, windows and doors
Contains special, clear ingredients which protect against UV-rays
Effectively prevents the greying process, does not crack, peel, flake or blister
1 litre covers approx 20 m² with 1 coat
Number of coats: 2 coats on raw wood
Osmo Cedar UV-Protection-Oil Extra is a tinted satin-matt finish for exterior. It is based on natural oils, is microporous, and does not crack, flake, peel or blister. When used as a final finish after staining wood, Osmo UV-Protection-Oil Extra prolongs the renovation time significantly. As a stand alone finish, with two coats, it prolongs the greying process on vertical
surfaces by UV-Protection factor 12 in comparison to untreated wood. The finish contains active ingredients which protect it from mould, algae and fungal attack. Easy to renew, no sanding or primer necessary. Easy to apply, will not dry during application.

Osmo UV-Protection-Oil Extra is based on natural vegetable oils. Natural oils penetrate deeply into the wood, keeping it elastic and healthy, and preventing it from drying and becoming brittle. The wood is allowed to breathe. Moisture can evaporate. Shrinking and swelling are reduced.

Recommended use:
For all vertical exterior woods (dimensionally and non-dimensionally stable): doors, windows and window sills, carports, timber cladding, balcony, screens & fences, pergolas, garden houses and furniture.

Based on natural vegetable oils (sunflower- and soyabean oil), siccatives (drying agents) and additives. Disaromatized white spirit (benzene-free). This product fulfils EU-regulation (2004/42/EC) according to the VOC limit value of max. 400 g/l (Kat. A/e (2010)).

Wood surface must be clean, dry and frost-free (maximum moisture content 20%). Osmo UV-Protection-Oil is ready to use, please do no thin, stir well before use. Clean old open-porous finishes thoroughly. Remove old varnishes. Please do not sand even surfaces finer than P120. We recommend to apply a first coat with a pigmented oil such as One Coat Only, Natural Oil Wood Stain or Country Colour. If additional protection against blue stain, rot and mildew is required for outdoors pre-treat (if possible from all sides) with Osmo Base Coat WR

Apply thinly and evenly along the wood grain with either an Osmo Natural Bristle Brush or the Osmo Microfibre Roller, and spread well. Allow for good ventilation whilst drying. Apply a second coat as before. When applying on an already pigmented surface or when renovating 1 coat of the UV-Protection-Oil is enough. Make sure that the surface has been cleaned upfront. The finish is – among other things – influenced by the wood’s natural characteristics, therefore a trial application is required before finishing.

1 l = approx. 16 m² (1 coat smooth wood)
1 l = approx. 12 m² ( 2 coats smooth wood)
Stripped and rough sawn wood need more material because of their surface structure.

Drying time:
approx. 12 hours (normal climatic conditions, 23°C /50%, normal humidity). Lower temperatures and/or high humidity can increase the drying time.Renovation:
Depending on the level of weathering apply 1 coat of Osmo UV-Protection-Oil Extra after approx. 3-4 years on the cleaned and intact finish. In general, one has to take a shorter renovation time into account when surfaces are exposed to extreme weathering, and surfaces where water cannot drain (horizontal surfaces) such as deckings, post caps, window sills and garden chairs (furniture). If, however, the greying process has already begun revive the surface with the Osmo Wood Reviver and re-apply 2 coats of the Osmo UV-Protection-Oil Extra.

Customer reviews

This product has not yet been reviewed

Also in Osmo Exterior Products

Back to top 
Our site uses cookies. For more information, see our cookie policy. Accept cookies and close
Reject cookies Manage settings