STYCCOBOND B95 is a high performance, one part, flexible, moisture curing
polyurethane adhesive used for installing a wide range of wood floorcoverings. It is
non-flammable and is quick setting to develop a high bond strength. It is protected
against bio-degradation and suitable for use over normal underfloor heating.
STYCCOBOND B95 can be used for securing engineered boards (semi-solids) and
a wide range of plank and wood strip flooring.
STYCCOBOND B95 can be applied to STOPGAP levelling compounds,
structurally sound, smooth, dry subfloors of concrete, sand/cement screed and
plywood (Minimum 6mm flooring grade WBP).
Sound asphalt and other non-absorbent surfaces must be skimmed with a minimum
of 3mm of the appropriate STOPGAP levelling compounds.
STYCCOBOND B95 can also be applied directly to STOPGAP waterproof surface
membranes within 24 hours of the membrane curing.
Proper subfloor preparation is essential for the correct installation of any
floorcovering. Subfloors must be structurally sound, smooth, dry (<65% RH) and free
from laitance and any contaminants which will affect adhesion. Use STYCCOCLEAN
C140 for removing grease, oil, polish, soap etc. from non-absorbent substrates.
Concrete and sand/cement screeds must be fully cured and any laitance or surface
treatments must be removed.The temperature of the floor must be maintained above
10°C throughout the application and drying of the adhesive. Underfloor heating must
be off for at least 48 hours before, during and after application.
Open time: Up to 20 minutes depending on temperature, humidity
and absorbency of the subfloor
with a B3 or 3mm x 6mm trowel or
with a B11 trowel
applied at 125 - 250mm centres
PLEASE ALLOW 2/3 DAYS FOR DELIVERY ON THIS ITEM