Description
STYCCOBOND F46 is a solvent free pressure sensitive acrylic adhesive that dries
to a permanent tacky film. It is used to reduce the incidence of trowel serrations
shadowing through thin vinyl flooring and is designed to give strong initial tack and a
high bond strength. It is protected against biodegradation and is suitable for use over
normal underfloor heating installations.
STYCCOBOND F46 can be used for securing a wide range of PVC sheet and tile
floorcoverings.
See the F. Ball Recommended Adhesives Guide for details of specific floorcoverings.
STYCCOBOND F46 has been tested to the standards of the International
Maritime Organisation and approved for use in marine floor installations.
STYCCOBOND F46 can be applied to STOPGAP smoothing underlayments,
structurally sound, smooth, dry subfloors of concrete and sand/cement screed,
plywood, flooring grade chipboard and hardboard.
Sound flooring grade asphalt must be skimmed with a minimum of 3mm of the
appropriate STOPGAP smoothing underlayment.
STYCCOBOND F46 can be applied directly to epoxy resin STOPGAP waterproof
surface membranes and other non-absorbent subfloors where the surface finish is
smooth enough to permit the installation of resilient floorcoverings.
Coverage
3m2 per litre with a STYCCOBOND A2 trowel
4m2 per litre with a STYCCOBOND fine notch (A1)
5m2 per litre with 1.5mm x 5mm trowel
Drying Time
Approx 40 mins depending on sub-floor