Description
Product Advantages
A new generation, silane-based adhesive featuring our revolutionary Titanium Quadruple Cross linking, Bona Quantum is an all-round adhesive that can be used for the installation of most types of wood flooring. Bona Quantum combines the benefits of hard-elastic and hard adhesive products in one formulation.
Technical Spec
Open time: Approx 40mins*
24 hrs*., light foot walk is possible after 4-6 hrs*.
Sanding can be carried out after 12 hrs.* Surface
treatment after 24 hrs.
Preparation
The substrate must in general be even, totally dry, clean, free from cracks and
physically sound. The surface should also be slightly textured. If applicable, it must
meet the requirements of local standards or codes of practice. If necessary, it should
be professionally prepared for laying. A primer is typically not needed. If the sub floor is
problematic the use of a primer like Bona D501, R540 or R590 can improve it. Uneven
floors should be levelled wit Bona H600, H610 (filling of holes), or H660. Note: Bona
Quantum is suitable in association with under floor heating. Such floors need to pass
the heating up protocol to drying up the screed! During installation and three days after the screed temperature must not pass 25 °C.
Application
Before using the adhesive the following climatic conditions must be met:
Air temperature: min. 18°C
Floor temperature: min. 15°C (with underfloor heating max. 20 °C)
R.H: max. 70 %
The adhesive itself must, if necessary, be brought to the right temperature.
Each tub covers approximately 15m². Apply with a Bona notched trowel.
Cleaning
Cleaning: Acetone or ethanol will remove but hardened adhesive can only be removed mechanically.
Storage / Shelf life
Shelf life: 1 year from date of production in unopened original container
The temperature must not fall below +5°C or exceed +25°C during storage. Store in cool, dry, well ventilated area.
From £3.50
£9.50
From £3.20
From £2.30
£23.71
£26.50
£44.00
£21.00
£12.00
£98.00
£150.00
£8.00
£98.50
£120.00
