Description
Treatex Hardwax Oil Ultra Clear is our next generation Hardwax Oil, designed to enhance and protect the natural beauty of all your interior timber surfaces. Hardwax Oil Ultra follows the success of our current formulas benefits of being user friendly, easy to apply and quick drying, all whilst improving ease of application and the durability of the finish.
The end result is a hard wearing and attractive finish in any situation including; floors, doors, stairs, furniture and kitchen worktops that is easy to maintain with our maintenance products and is spot repairable if the surface is damaged.
Treatex Hardwax Oil Ultra is based on our formulation of sustainable raw materials that include Bees wax, Carnauba wax, Candilla wax, Linseed oil, Sunflower oil, Jojoba oil. It contains no biocides or preservatives.
Suitable for: Internal use
Recommended timbers: All (dense/oily timbers may require Treatex Thinner). Has a warming effect on some timbers.
Applications: Floors, doors, stairs, worktops, woodturning, skirting, furniture, instruments etc.
Please Note!
Clear Hardwax Oil must always be used as the final coat when Natural Hardwax Oil or Colour Tones are applied*
Coverage: 2.5L Tin will cover approximately 50m² in one coat / 30m² in two coats depending on the timber and method of application.
Application Method 1 - when buffing the first coat with a machine
Sand 120-150 grit - Hardwax Oil should always be applied to bare timber or over a previous coat of Hardwax Oil
Apply a thin coat of ULTRA using a good quality roller
Leave for 10 minutes
Slow buff with a soft pad to remove excess
Finish using a lint free cloth under the buffer
Leave for 45 minutes to dry with good ventilation
Apply the final coat with best quality microfibre roller - do not buff this coat as there won’t be enough product left on the timber to protect properly
Usually ready for use after 8 hours
Usually ready for furniture after 18 hours
Application Method 2 - when applying with a brush or roller
Sand 100-150 grit - Hardwax Oil should always be applied to bare timber or over a previous coat of Hardwax Oil
Apply the first coat using a good quality brush or roller - do not apply thickly - this will result in extended drying times
First coat will usually be dry within 3-6 hours with good ventilation and airflow
Apply the second coat using a good quality brush or roller
Usually ready for use after 8 hours
Usually ready for furniture after 18 hours
From £8.00
From £5.50
From £8.88
£6.50
From £36.00
From £6.50
From £18.00
£91.72
£45.50
From £5.50
£25.00
From £8.50
£8.99
From £16.55
£21.50
£23.94
From £25.36
